GRAS 48LX-8 UTP Line-Array, 8 Channel, Medium Pressure

3 Commercial Overlay TOP p1814x318

Acoustic measurements in laminar and turbulent airflow require low-profile microphones to avoid disturbing the sound field. This is why we at GRAS have developed the UTP microphones – Ultra-thin Precision microphones.

UTP microphones are surface-mounted condenser microphones with all the expected quality and precision of a classical measurement microphone. They beat any flush- or surface-mounted microphone on the market - superior performance, unbeatable price, fast and repeatable mounting – and should be a first choice for cost-effective, high-precision testing.

The GRAS 48LX-8 is a line array with eight UTP microphones. It is only 1.35 mm (0.05 inches) in height and, therefore, ideal for measurements in boundary layers and turbulence.

Flat Fast Precise banner px1814 lille

Superior Performance - Unbeatable Price

Explore the benefits, the very small things which make the BIG difference.

Quality Data
UTP provides accurate data from precision measurement microphones manufactured to narrow specifications. All LX versions have TEDS.

Low Profile
With a height of 1.35 mm the door to a whole new world of what can be measured in boundary layers and turbulent flow opens.

Simplified Cabling
The line array configuration provides easy connection and avoids acoustic interference from messy cabling. 

GRAS UTP Microphone 48LX-8

Easy Mounting and In-situ Verification
As shown below, 48LX-8 is easily mounted using masking tape. Once mounted, the setup can quickly be verified in-situ, a major advantage when you want to check the integrity of your measurement setup.

Cost-saving Solution
Easy mounting, CCP interface with integral cabling and in-situ verification all add up to reduced setup time and faster measurements- with reliable data.

Flow-optimized Fairings
Rubber fairings with a rise angle of 6.5 degrees ensure minimal disturbance to the sound field/airflow.

 

 

 

Easy Mounting and In-Situ Verification

The UTP microphones are easy to mount and remove, even in confined spaces. 
48LX-8 line-array is mounted using masking tape. Reproducing a previous setup can be done quickly, and geometry is maintained.

Fast and reliable in-situ verification saves time and increases confidence.
A special verification adapter with a soft cushion allows for quick, easy, and reliable in-situ verification. Four distance spacers ensure that the correct volume is achieved and that this volume can easily be reproduced.

Even on curved surfaces, this verification method is so precise that dismounting is not necessary.

4 Commercial Overlay BUND p1814x318

Freq range: 20 Hz to 20 kHz (±1 dB)
                      10 Hz to 70 kHz  (±3 dB)
Dyn range: 54 dB(A) to 170 dB
Sensitivity: 0.6 mV/Pa (±3 dB)
Use: For aeroacoustic measurements

GRAS 48LX-8 UTP Line-Array, 8 Channel, Medium Pressure

Technology

Introduction

48LX-8 is an Ultra-Thin Precision (UTP) surface microphone line-array for wind tunnel testing.

It consists of 8 low-profile 1/4" CCP medium-pressure condenser microphones. They are mounted with rubber fairings in a line array configuration on a flexible PCB. The height is 1.35 mm and the angle of the fairings is 6.5 degrees.

It has TEDS for easy channel identification. The 8 channels are connected to a 15 pin D-Sub male connector. The total cable length is 5 meters.

48LX-8 line-array is easy to mount and demount. The flexible PCB/plastic strip is about 10 mm wider than the microphones on each side. Therefore, it can be mounted using masking tape straddling the top side of the strip and the structure.

Remounting is easy, and the geometry of the mounting can easily be maintained and used in a different location or measurement setup.

The strip can be bent along its length, making it possible to mount it on curved surfaces.

Typical applications and use

48LX-8 is for low to medium level surface pressure measurements on planar and curved surfaces, exposed to slipstreams, for

  • Wind-induced noise measurement on vehicles

  • Wind-tunnel testing

Field Verification

For sensitivity verification in the field using a sound calibrator, a special adapter is available, the RA4800 Adapter for Sensitivity Verification of Flush/Surface Microphones. RA4800 is furnished with a round, soft pad similar to those used on over-the-ear headphones. This pad ensures a sealed cavity for the calibration signal. Read more here.

With this adapter, quick and convenient in-situ sensitivity verification is possible, and therefore it is possible to check the integrity of the measurement setup immediately before measurements.

Calibration

For sensitivity and frequency calibration, The RA4803 Sensitivity and Frequency Calibration Kit for 48LX-4/48LX-8 is available.

This kit contains an adapter for sensitivity calibration with a pistonphone, and an electrostatic actuator for frequency calibration.

48LX-8 is checked and calibrated before leaving the factory. An individual calibration chart is supplied with each microphone and includes an individual pressure frequency response.

Quality and warranty

GRAS microphone sets are made of components from our proven standard portfolio and are all manufactured of high-quality material and branded parts, which were chosen and processed to ensure life-long stability and robustness. All parts are manufactured and assembled at the factory in Denmark by skilled and dedicated operators in a verified clean-room environment.

The warranty period for the 48LX-8 is 2 years.

The warranty covers defective materials, and workmanship for the sensor element, printed circuit board, and housing.

Cable and connectors are covered by a 6 months warranty period.

Service

Should you by mistake damage or destroy a microphone element or the cable, we offer to repair or exchange the whole line array.

GRAS Sound & Vibration continually strives to improve the quality of our products for our customers. Therefore, the specifications and accessories are subject to change.

 

 

Specifications

Frequency range (±1 dB)
Hz
20-20 k
Frequency range (±3 dB)
Hz
10-70 k
Dynamic range lower limit (microphone thermal noise)
dB(A)
54
Dynamic range upper limit
dB
170
Set sensitivity @ 250 Hz (±3 dB)
mV/Pa
0.6
Set sensitivity @ 250 Hz (±3 dB)
dB re 1V/Pa
-64.4
Output impedance
Ω
<50
Power supply min. to max.
mA
2 - 10
Microphone venting
Front
Temperature range, operation
°C / °F
-20 to 70 / -4 to 158
Temperature range, storage
°C / °F
-40 to 85 / -40 to 185
Temperature coefficient @250 Hz
dB/°C / dB/°F
-0.03, Typical
Static pressure coefficient @250 Hz
dB/kPa
-0.0003
Humidity range non condensing
% RH
0 to 80
Humidity coefficient @250 Hz
dB/% RH
-0.01
Influence of axial vibration @1 m/s²
dB re 20 µPa
73
Sensitivity difference between microphones, max. dB 2
Phase difference between microphones, 20 Hz to 20 kHz degrees ±5
TEDS UDID (IEEE 1451.4) - one for each microphone   I27-0-0-0U
Connector to strip   15 pin D-Sub male
Height mm 1.35
Dimensions single sensor, width x length mm 9 x 18
Dimensions strip, width x length mm 50 x 460
Weight g / oz 35 / 0.71 (excl. cable)
175 / 6.17 (incl. cable)

 

Frequency curve typical 48LX ny

The frequency response is within ±3 dB up to 70 kHz

 

48LX 1 4 8 noise test

 

48LX-8 can be mounted on a curved surface. The radius of the bend must be at least 500 mm, corresponding to an arch with a height of 52 mm.

 

LX 8 minradius

 

 

Dimensions

48LX 8

Ordering info

Included items

GRAS 48LX-8  UTP Microphone Line Array, 8 Channel, Medium Pressure, with 3-meter cable
GRAS DB0507 Mounting Tape for 48LX Series Line Arrays

 Optional items

GRAS RA4800 Adapter for Sensitivity Verification of Flush/Surface Microphones
GRAS RA4803 Sensitivity and Frequency Calibration Kit for 48LX-4/48LX-8
GRAS AA4800-8 1.5 m 48LX-8 Splitter Cable D-Sub/8xBNC Male
GRAS AA4801-8 1.5 m 48LX-8 Splitter Cable D-Sub/8xMicrodot Male
GRAS AA4802-8 1.5 m 48LX-8 Splitter Cable D-Sub/8xSMB Female
GRAS AA4803-8 1.5 m 48LX-8 Splitter Cable D-Sub/4xInfinitiband
GRAS AA4804-8 1.5 m 48LX-8 Splitter Cable D-Sub/D-Sub 25
GRAS AA4810 5 m 48LX Extension Cable D-Sub/D-Sub
GRAS AA4811 10 m 48LX Extension Cable D-Sub/D-Sub
GRAS AA4812-CL 48LX Extension Cable D-Sub/D-Sub Custom Length
GRAS DB0507 Mounting Tape for 48LX Series Line Arrays

Get Quote

I have read and accept the Privacy Policy.